-
2 x pnp
papers with weights of 120 g/m2, metal-laminated sheets, corrugated card, sheet metals up to 2 mm thick, PCB boards
cylindrical M30
double sheet control
receiver for ultrasonic double sheet control
pulse operation with amplitude evaluation
200 kHz
7 mm in front of transmitter and receiver
20 - 30 V d.c., reverse polarity protection
± 10 %
≤ 45 mA
5-pin M12 initiator plug
1.2 m PVC cable with 2-pin plug IP 20
double sheet output
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
missing sheet output
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
5.5 ms in trigger mode
only trigger mode:
A measurement is carried out as the edge rises at the control input (edge change from -UB to +UB, pulse width ≥ 1 ms). After a 0.5 ms response time, both outputs are set in accordance with the reading. The states of the two control outputs are frozen until the next rising edge.
A measurement is carried out as the edge rises at the control input (edge change from -UB to +UB, pulse width ≥ 1 ms). After a 0.5 ms response time, both outputs are set in accordance with the reading. The states of the two control outputs are frozen until the next rising edge.
control input
50 mm ± 3 mm
± 45° from the perpendicular to the sheet
brass sleeve, nickel-plated, plastic parts, PBT
polyurethane foam, epoxy resin with glass contents
IP 65
+5°C to +60°C
-40°C to +85°C
not necessary
not necessary
1 x Duo-LED; green: working / red: double sheet / flashing red: missing sheet
receiver for ultrasonic double sheet control
