모든 어플리케이션에 대한 적합한 솔루션

microsonic 센서는 다양한 동작 모드 및 장치 구성으로 자동화를 생각할 수 있는 모든 곳에 사용 가능 합니다.

Distance control to the creel or fence

Feeding robots are used in agriculture to automatically feed animals. They deliver the required amount of feed to the animals and push the feed up if necessary.

mic ultrasonic sensors or lcs+ ultrasonic sensors measure the distance to creel and to animals. The robot feeds the fresh amount of feed based on the measured distance values.


Presence detection

Sensors with a switched output, e.g., from the mic+ sensor family can be used, depending on the size of the box or container. The mic+25/D/TC, mic+35/D/TC or mic+130/D/TC can be selected for scanning small boxes.

With larger containers you are recommended to use a mic+340/D/TC or mic+600/D/TC. If the box or container is to be scanned by several sensors, it is recommended to synchronise them with each other.

Furthermore, the pms ultrasonic sensor in hygienic design is recommended in the food industry, the pharmaceutical industry or the beverage industry.

Path edge control

The ultrasonic edge sensors bks are designed as fork sensors and function as a one-way barrier. They are used for path control and emit an analogue signal of 0–10 V or 4–20 mA which is proportional to the orientation of the path edge.

Double sheet control

identifies two or more sheets of material on top of each other. The  dbk+4 product range is ideal for use where paper is in use, such as sheet fed printing presses, printers, copiers or collating machines. For thicker materials, plastic sheets and coarse corrugated cardboard, the dbk+5 ultrasonic double-sheet detection is used.

Checking diameter

The diameter of a roll or coil of material can be detected by an ultrasonic sensor with analogue output and the drive adjusted or brake applied accordingly. For small diameters this is a typical application for a mic+35/IU/TC and for diameters up to 2.5 m a mic+130/IU/TC.

Installation for a foil extruder

The mic+ ultrasonic sensors with analogue output 0 – 10 V and 4 – 20 mA are ideally suited for controlling the diameter on a foil extruder.

Through-beam barrier

Ultrasonic through-beam barriers are highly suited for reliable presence control and counting of objects at high speed. The through-beam barrier consist of a transmitter and a receiver. The transmitter emits acoustic pulses on a cyclical basis which are captured by the receiver. If an object interrupts the pulses between the transmitter and the receiver, the switching output of the receiver is set.

The robust ultrasonic barrier ews is available as a cuboid miniature housing and a cylindrical M18 housing.

Label detection

The esf-1 label sensor reliably detects high-transparency, reflective materials as well as metallised labels and labels of any colour. The measurement cycle time automatically self-adjusts to the sound power required.

Foil tear monitoring

Can be implemented with all ultrasonic sensors with switching output. If the material does not lie flat, it is advisable to operate the sensor as a two-way or reflective barrier. This operating mode also works reliably when the sonic beam is deflected away by the waves in the material. All ultrasonic proximity switches with the microsonic Teach-in support the operating mode reflective barrier.

레벨 제어 (Level control)

가까운 mm 단위부터 최대 8m 까지 레벨 측정이 가능합니다. 초음파센서는 최소/최대 제어로 하나 또는 두개의 출력(0-10V, 4-20mA)이 가능합니다. 화학물질에 강한 제품으로 pico+TFcrm+hps+ 제품이 있습니다 ..

압력환경에서의 레벨 제어 (Level control under pressures)

압력환경에서 사용가능한 초음파 센서는 hps+ 초음파 센서 가 있습니다. 추가로 화학물질에 강하며 2개의 PNP 출력타입과 아날로그와 스위칭 출력이 되는 센서가 있습니다.

Filling level monitoring in small containers

Detection of filling levels from just a few millimetres up to 8 m can be made. Ultrasonic sensors with one or two switched outputs for minimum/maximum control, or with 0-10 V and 4-20 mA analogue output are available. Even in small containers with a diameter of less than 5 mm can be measured with the zws ultrasonic sensor + SoundPipe.

Detecting obstacles

Ultrasonic sensors of the mic+ family enable the contactless protection of automated guided vehicles in the driving direction. When using several sensors these can be synchronised with each other to avoid influencing each other. With a pre-alarm range and a stopping range, the vehicle can be halted smoothly before an obstacle without the impact bumper triggering the braking mechanism.

Height control of the field sprayer boom

For height control of the field sprayer boom, several wms ultrasonic sensors or mic ultrasonic sensors continuously measure the distance to the crop. The control system of the field sprayer uses the measured distance values to compensate for unevenness in the soil and different plant heights. This allows crop protection agents or fertilisers to be distributed evenly over the field.

The all-metal housing of the two sensor families is specially designed for outdoor applications on agricultural machines.

Height and distance detection of rows of trees or trellises

The wms ultrasonic sensors or mic ultrasonic sensors measure the lateral distance to vines or trellises. With the measured distance values, the control system automatically adjusts the line of the harvesting platform.

The continuous height detection of the rows of trees or trellises allows the spraying areas to be identified. Thus, spraying areas can be added or removed automatically via the control system. This minimises the use of crop protection agents and ensures even distribution.

높이 및 폭 측정 (Height and width measurements)

mic+ 초음파센서 또는 pico+ 초음파센서, zws초음파센서 , 를 사용하면 3차원 감지를 통해 어떤 크기의 상자도 검출이 가능합니다. 다른 검출거리에서도 가능합니다.

Edge detection of flat objects

Very flat objects on a conveyor belt can often be detected via an "indirect" reliable measurements: An ultrasonic sensor with switching output measures the edge of the object in an incline compared to the conveyor transport direction. The edge of the object forms a triple reflector with the conveyor belt and reflects the sound waves back to the sensor.

인체 검출 (People detection)

만약 동작 공간에 검출거리를 초과하여 사람의 존재를 감지할 때 초음파 센서를 추천 드립니다. 동작범위는 더 크며, 초음파 주파수는 더 낮습니다. 낮은 주파수를 가진 초음파 센서는 모직 같은 흡수성 의류 소재를 더 쉽게 감지합니다.

자동기계장치 감지(Robotic sensing)

센서의 소형 사이즈로 분류한 M18 사이즈의 하우의 pico+ 초음파센서 로보트 팔에 설치 가능한 사각 하우징의 zws 초음파센서  

위치 제어 (Positioning)

유리 재질이나 부드럽고 평평한 표면 검사할 때는 초음파 센서로 표면을 수직으로 검출이 효과적입니다.

 

품질 관리 (Quality control)

포장 기계처럼 빨리 지나가는 물체를 감지하기 유용한 사용은 초음파 센서의 광범위한 어플리케이션중에 하나입니다. 사각형 하우징의 zws 초음파 센서 , 소형타입의   sks 초음파 센서 ,M18 하우징을 가진 pico+ 초음파 센서IO-Link 인터페이스 .를 가진 센서도 있습니다, the pms ultrasonic sensor in hygienic design and the lpc+ sensor family with 2 output stages and 4 scanning distances.

루프 제어 (Loop control)

초음파센서는 루프 위를 검색하여 아날로그 출력으로 제어하며, 루프의 깊이에 따라 재료공급을 조정합니다. 루프 소재가 옆으로 흔들리는 경향이 있는 경우 위에서 검색할 때 음파는 매우 쉽게 편향됩니다. 이 같은 경우 그림과 같이 아래에서 루프를 검출하는 방법으로 추천 드립니다.

 

Splice detection

The esp-4 splice sensor reliably detects splices and also labels. It is available both in M18 housings, as well as in M12 with external receiving transducer.

Wire break detection

during the winding/unwinding of wires. Depending on the size of the drum, a mic+130/D/TC with 1,300 mm operating range or a mic+35/D/TC with 350 mm operating range can be used. If the position of the wire on the drum should be recorded, there are ultrasonic sensors with analogue output available.

mic+130/D/TC for a measuring distance until 1,300 mm,

mic+35/D/TC for a measuring distance until 350 mm.

Stacking height control

Whether wooden boards, panes of glass, sheets of paper or coloured plastic panels, ultrasonic sensors are ideal for detecting the height accuracy to millimetre precision.

Monitoring of trays

초음파 센서는 초음파가 물체에 흡수되거나 모서리 검출 또는 초음파 감지가 먼 경우가 있기 때문에 항상 양방향이나 반사판을 사용하여 설치되어야 합니다. 이 상황에서 추가적인 반사판은 검출할 물체의 뒤편에 설치됩니다. 초음파 센서의 스위치 출력은 창mode(모드, 방식)에서 물체감지를 하고 반사되는 초음파 신호로 검출합니다. The lpc+ in the M18 threaded housing is ideal for this purpose.

Ultrasonic barrier

It is easy to set up a two-way or reflective barrier using an ultrasonic sensor operating in window mode. To do this, a permanent reflector is positioned behind the objects to be scanned. When an object obscures the reflector, a switching signal is generated.

 

Sonic reflector

The sonic beam can be redirected via a reverberant, smooth reflecting surface. There are 90° sonic reflectors available as accessories for this. These can be used to advantage in certain confined installations.

Vibration feeder

Ultrasonic sensors, such as the pms sensor in Hygienic Design, continuously measure the level in the vibratory feeder. If the sensor detects a level that is too low, the feed rate is increased. Conversely, if the sensor detects a level that is too high, the control system reduces the product feed to ensure a consistent process.

pms ultrasonic sensors in Hygienic Design

zws ultrasonic sensors in small cubic housings

상자 레벨 제어 (Crate inspection)

The mic+ 초음파센서pico+ 초음파 센서 는 상자안의 제품이 정상으로 채워졌는지 비워졌는지 또는 컨베이어 벨트 위의 플라스틱 병의 레벨검사같은 특별한 어플리케이션을 위해 개발되었습니다. 비슷한 두 가지 센서를 동기화 하여 설계를 간소화할 수 있습니다. The pms ultrasonic sensor in hygienic design is suitable for this process as well.

 

Volumen flow

ultrasonic sensors can be used for continuously detecting the filling level of objects on a conveyor belt. When the sensor detects minimum filling level, the feed rate will be increased. On the contrary, when the sensor detects a maximum filling level, the control unit will reduce the feed rate in order to provide a smooth filling level process. The pms ultrasonic sensor in hygienic design is suitable for this process.

  • katalog_en_1046x850.jpg

    특별한 요구 사항이 있습니까?

    우리와 함께, 당신은 개별 솔루션을 쉽게 찾을 수 있습니다. 이것처럼 간단한 일은 없습니다.

    당신의 어플리케이션에 대하여 말씀해 주십시오.

    Technical Support Team

Top